Introduction
This article will describe a way to get full access to the file system on Symbian Belle Refresh. All methods of hacking of various versions of Symbian Belle are very similar, but in each case you need to apply the necessary files for a specific version. Therefore, in order to avoid misunderstanding and not necessary issues of inexperienced users, this article was written. So, move on items and everything will turn out.
1. Download and install on the NortonsymbianHack.sis smartphone - 690KB (remove the previously installation file from the archive):
2. After installation, start it:
3. Being in the program, click Options -\u003e Anti-Virus -\u003e Quarantine List:
4. After that click Options -\u003e Restore. Restore quarantine files:
5. Get out of the program and delete it from the application manager. Folder remained c: / Shared / And you can also delete it if desired.
6. Next, download and install the ROMPATCHERPLUS_3.1.SIS program - 198KB (again, first remove from the archive).
7. After installation, open the program and apply the Open4all patch. It opens access to all closed folder in the file system:
8. Download and install the program (if suddenly, for which reasons will write that the "certificate is expired", then change the date on the smartphone for 2011). This is a file manager.
9. Download and copy the InstallServer.zip archive to the smartphone - 75KB
9. Run the X-Plore program and find the downloaded archive in it. Open it:
There are two files. Copy the file ynstallserver.exe in C: / SYS / BIN /. (nothing needs to be renamed, so it should be)
10. Move the runinstallservernotforrom.rmp to the / Patches folder (is where you installed ROMPATCHER). After that, open the ROMPATCHER and select RUNINSTALLSERNOTFORROM there and put Add to AUTO.:
All, smartphone hacked.
Conclusion
As you can see, it was not difficult and pretty quickly.
By the way, if the installation will write that this application is incompatible with the smartphone, you should not pay attention. Anti-virus itself is old, but is suitable for hacking Symbian Belle.
If someone has hit the inscription Restore Failed: File Already Exists, I am very simple to solve this problem. You need to make a smartphone formation (important information will need to be saved somewhere, as it will be removed from the smartphone). If it does not help, remove or format the memory card, and then try hacking again.
I myself personally tried on two different phones and no mistakes were observed.
Nokia N8 + Nokia Belle Refresh (111.040.1511)
Software Update and Downloads
Latest Software Update.
Latest Software Release For Nokia N8. IS. Nokia Belle(111.030.0609
)
To Check for Updates, On Your Phone, Select Menu -\u003e Applications -\u003e SW Update
Software update and download
Last update by
Last Software Version for Nokia N8-00 - Nokia Belle Refresh (111.040.1511)
The availability of this update may depend on the service provider of the cellular network. To check the availability of updates, open the software update application on the phone.
Beginning of work. Questions and answers. Manual
What version of Nokia Suite is compatible with the Nokia N9 device?
Does the capacitive touch screen work if you put on gloves?
No, the capacitive touch screen reacts only to unprotected finger.
Installing and removing a SIM card
How Can I Recover / Reset / Restore MY PHONE SOFTWARE?
How to restore phone software?
Nokia Software Recovery Tool
What are Microsoft Apps applications on the Nokia Belle device?
Microsoft® Apps Apps is Microsoft® Business Applications available on the Nokia Belle phone, a software has been installed on the Cat 111.030.0609 or later. To find out the software version, type * # 0000 #.
The package includes the following applications:
◦Microsoft® Lync ™ 2010 Mobile for Symbian
◦Microsoft® ONENOTE® FOR SYMBIAN
◦Microsoft® Office Mobile
◦Microsoft® PowerPoint® Broadcast.
How to reset the Symbian ^ 3 device?
To restore the factory parameters in Nokia Symbian ^ 3 devices (for example, Nokia N8-00, E7-00, C7-00, Astound, C6-01) there are two different reset commands. Commands can be found in the section Menu\u003e Parameters\u003e Phone\u003e Telephone Management\u003e Factory Settings:
1) Restore
◦ This command restores the source (i.e. factory) parameters and does not affect documents or files stored on the device.
◦ After resetting the email parameters, you must create anew.
*#7780#
entered from the keyboard.
2) Delete data and restore
◦ This command restores the original (factory) parameters and removes all the contents of the storage device (E :), as well as pre-loaded content, for example, widgets. This command also deletes all user data from the phone's memory (C :).
◦ After resetting and re-installing applications, all parameters need to be created again.
◦ This command meets the command *#7370#
entered from the keyboard.
◦ Note that all user files on the E-to-storage device E: and in the phone's memory C: Photos and video clips will be removed. Therefore, it is important to make a copy of user data before resetting the device. Use OVI Suite to create a full backup of the contents of the device.
◦ Do not use this command without much need because some predefined applications can be deleted (for example, the Internet TV widget), and you will need to use the OVI store or the program. Menu\u003e Applications\u003e Update. BY.
When performing a reset device, you may need to enter the blocking code. If the blocking code has not been changed, use the default code 12345.
Before performing a reset, complete all active calls and close the connections. If necessary, select the offline profile and make sure that there are no active connections to the WLAN network.
How to format the Nokia Symbian device?
The formatting of the device can be performed by entering the combination *#7370# In standby. To reset the device settings, the blocking code may be required. By default, the blocking code is 12345.
Important remark!
◦ When formatting the device, all data and user settings, as well as additional applications and operator settings are irreversible.
◦ If a backup copy of the device data was created, they can be restored after formatting, but some third-party applications may have restrictions that do not allow them to restore them from the backup.
◦ If formatting is used to correct the improper behavior of the device, using the backup data recovery function, it is possible to fix this unwanted behavior. In this case, partial recovery can help.
◦ The contents of the SIM card and memory card (MMC) are not deleted when formatting. Note that on some models of devices (for example, Nokia N8-00, E7-00, E6-00 and X7-00) in the specified situation, internal memory is formatted (E :). Therefore, it is important to back up all data on the disk E: Before resetting the device. Return up data to a computer using Nokia Suite.
What phones are supported by Nokia Software Recovery Tool?
Program Nokia Software Recovery Toolyou can use to reinstall software on many SERIES 30+, SERIES 40, ASHA, Nokia Belle and Nokia X phones. For Lumia phones with Windows Phone 8.0 / 8.1 or Windows 10, use the Windows Device Recovery Tool program. For more information, see here.
The Nokia Software Recovery Tool program currently supports the following telephone models:
◦Nokia 105.
◦Nokia 105 Dual SIM
◦Nokia 130.
◦Nokia 130 Dual SIM
◦Nokia 207.
◦Nokia 208.
◦Nokia 208 Dual SIM
◦Nokia 215
◦Nokia 215 Dual SIM
◦Nokia 220.
◦Nokia 220 Dual SIM
◦Nokia 222.
◦Nokia 222 Dual SIM
◦Nokia 225.
◦Nokia 225 Dual SIM
◦Nokia 230.
◦Nokia 230 Dual SIM
◦Nokia 301
◦Nokia 301 Dual SIM
◦Nokia 500.
◦Nokia 5130 XpressMusic
◦Nokia 515
◦Nokia 515 Dual SIM
◦Nokia 603.
◦Nokia 700.
◦Nokia 701.
◦Nokia 808 PureView.
◦Nokia Asha 200.
◦Nokia Asha 201.
◦Nokia ASHA 2010.
◦Nokia ASHA 202.
◦Nokia ASHA 2020.
◦Nokia ASHA 203.
◦Nokia ASHA 2030.
◦Nokia ASHA 210.
◦Nokia ASHA 210 Dual SIM
◦Nokia ASHA 230.
◦Nokia ASHA 230 Dual SIM
◦Nokia ASHA 300.
◦Nokia Asha 3000.
◦Nokia ASHA 302.
◦Nokia ASHA 3020.
◦Nokia ASHA 303.
◦Nokia ASHA 3030.
◦Nokia ASHA 305
◦Nokia ASHA 3050.
◦Nokia ASHA 306.
◦Nokia ASHA 3070.
◦Nokia ASHA 308.
◦Nokia ASHA 3080.
◦Nokia ASHA 309.
◦Nokia ASHA 3090.
◦Nokia Asha 310
◦Nokia ASHA 311.
◦Nokia ASHA 3110
◦Nokia Asha 500
◦Nokia ASHA 500 Dual SIM
◦Nokia ASHA 501.
◦Nokia ASHA 501 Dual SIM
◦Nokia ASHA 502 Dual SIM
◦Nokia ASHA 503.
◦Nokia ASHA 503 Dual SIM
◦Nokia ASHA 503 Dual SIM
◦Nokia C1-01
◦Nokia C1-02i
◦Nokia C2-00
◦Nokia C2-01
◦Nokia C2-02
◦Nokia C2-03
◦Nokia C2-05
◦Nokia C2-06
◦Nokia C2-07
◦Nokia C2-08
◦Nokia C3-00
◦Nokia C3-01
◦Nokia C3-01I
◦Nokia C6-01
◦Nokia C7-00
◦Nokia E6-00
◦Nokia E7-00
◦Nokia N8-00
◦Nokia T7-00
◦Nokia X2 Dual SIM
◦Nokia X2-01
◦Nokia X2-02
◦Nokia X2-05
◦Nokia X7-00
◦Nokia Oro.
Attention! Those who the operator is the NSS company is better to wait for the correction of bugs in the new firmware. Or will have to go to another operator. Smartphones running Symbian Belle Refresh for incomprehensible reasons refuses to make and receive calls! SMS works in normal mode, but it will not be possible to call even at 112.
OS Symbian Belle Refresh carries the following innovations:
At the same time, as it usually happens, you should expect a refusal to work some applications that worked on the previous version of software.
Methods of updates (myths and reality)
According to developer statements, it is enough to download and run the new version of the Nokia Suite, connect your smartphone to a computer using a USB cable and proceed to instructions. This will save all contacts, notes entries and other important data, and only some set applications can suffer. In fact, everything is not so smooth and most users have so-called glitches, slow motion and other manifestations of the unstable work of the smartphone. An experimental way was revealed by three ways to update smartphones, which provide stable operation of devices after installing OS Symbian Belle Refresh and all of them are not without sacrifice.The first way is simpler, but most users have already been late to use it. So, it is advisable to get rid of everything that you ever installed in a smartphone. Simply put, you need to make a reset to factory settings using a combination * # 7370 #, but before it is desirable to format the built-in memory (disk E - Nokia N8). Then you can run the Nokia Suite program and it will suggest you to do everything else. It will only be followed to follow these instructions.
If you have already tried to update your smartphone to OS Symbian Belle Refresh, but did not make a reset and format memory, and after the update, they felt that the smartphone was not stable, you can try to make a reset, to format the built-in device memory (or memory cards) and reinstall the new version. By using the same Nokia Suite.
If you decide to fully flashing the smartphone, Phoenix (Phoenix) will come to your aid, about which we will tell a little more.
For the firmware you will need:
Do not hurry with the second point, since the above Phoenix in most cases steadily works without the use of the second and third program. If there are problems and Phoenix will not see the smartphone, you will have to use the Nokia Service Application Manager program to delete everything connected with Nokia, and then install a single driver and phoenix itself.
Attention! Phoenix is \u200b\u200binstalled long enough even on powerful computers. Therefore, you should not panic if it seemed to you that the computer would freeze!
Special attention!!! All programs, including the firmware, install only through the click right-click on the label, with the choice of administrator rights! Fenix \u200b\u200blaunch to produce similarly!
On Windows XP there are problems with the choice of administrator rights. If you have a similar situation, we skip this step past the ears and do as usual.
Symbian Belle Refresh firmware
Naturally, you will need the firmware itself that you need to install in the same folder in which Phoenix (Phoenix) was installed:Work with Phoenix.
So, Phoenix is \u200b\u200binstalled, the firmware is also installed. Go ahead. Run the Phoenix (with administrator rights), connect your smartphone to a computer via a USB cable and see the window. It may be necessary to wait a bit (30-60 sec.) To install the drivers.
Click on the NO Connection string and select the RM-XXX connection (XXX - your version of the product code). In the left lower part of the window, the word ready should appear.
After that, go to the top tabs of the program window. Zhmem. File\u003e Scan Product And we wait when something like this will appear in the bottom panel of the window:
Next again we go to the top tabs and click Flashing -\u003e Firmware Update, After that, a new small window will open, in which the product code of your smartphone should appear.
If the graph with the product code remains empty, click on a small button with ellipsis and select the desired product from the list that appears in the new window. If you are a tick in the "Detect Produkt Automatically" window, remove it and choose the product-code manually.
In this list you need to choose any, similar to your smartphone, product code, for example, if you are from Ukraine and you have a black phone, then choose the product code titled XXX_UKRAINE_BLACK or XXX_UKR_BLACK (DG - dark gray), (white smartphone - White, etc.), but in general, you can choose any product-code you like, because All of them include Russian. The main thing is that three numbers after the letters of RM coincide with those you saw when they gained a combination * # 0000 #.
Attention! If you select the Kazakhstan product, then you may have the FM translator (Nokia N8).
Next, click OK, and after closing the window with the product with codes Click in the left window on the button Update Software.. The firmware will begin, which should be completed by the appearance of this window:
After the handle is stretched on the smartphone screen, you can turn off the smartphone from the computer and start setting up accounts and everything else that is required in everyday life. That is, you can start using a "new" smartphone. Congratulations!
Firmware in the dead mode or the return of a dead smartphone to life
There is a slightly different outcome of the "dances with a tambourine" during the firmware of smartphones or simply, as a result of your experiments with various programs. In simple language, sometimes the firmware is silent. The smartphone in this case does not turn on and all that you can see during attempt to turn on the device is a white screen with Nokia inscription. In this case, you should not panic if you have not lowered the firmware version, as you can return the firmware in the dead mode.To do this, you need all the same Phoenix, but you need to run it differently. First, the launch of the phoenix occurs without connecting the smartphone to the computer. Secondly, we do not touch the No Connection window and immediately go to the File tab, and then select Open Product.
Then select your product code from the list:
Then we go back to the Flashing tab, click on the Firmware Update line and see the window that appears. First you need to put a tick "Dead Phone USB Flashing".
Then, if your firmware is not specified in the product line, click on [...], after which another small window will open with a list of available product codes. If you are a tick next to "Detect Produkt Automatically", remove it and choose the product-code manually.
Choose the one that matches your country and the color of the smartphone. After that, click the OK button in this window and go to the left small window. Click on the SW RESET button and see the following (or similar) Window:
To continue the firmware, you must follow the items specified in a small window.
For example, for Nokia N8 the following:
- Disable USB cable (but we have not even connected it).
- Click the power button for 8-10 seconds (to triple vibration).
- Connect the USB cable to the smartphone.
- Press the OK button.
For example:
- Disable USB cable.
- Remove the battery from the smartphone.
- Connect a USB cable.
- Insert battery and press the power button
- Press the OK button
And other options ...
Whatever they were, they should return to the life of the smartphone on which the firmware flies (except for cases with a decrease in the last).
If it does not work first time, try again, and again. In case of failure when flashing through the SW RESET button, you can try to flash through the Refurbish button. The main thing is not to lower your hands and everything will definitely.
Attention! All actions produced with your own (and the more strangers) smartphone, you make a risk. The administration of the site of responsibility for the performance of smartphones is not boring.
To work with the Phoenix program (Phoenix), it is recommended to use only the original USB cable, which was complete with your smartphone!
After updating Nokia smartphones to version 111/040.1511 - Symbian Belle Refresh, they are easily leaving. To do this, follow the instructions for those who installed the BELLE FP1 update and activate the Install Server RP + V1.7.RMP patch.
Week about the release of this update brought our active user -.
Successful firmware!
The Symbian Belle operating system, which is the final version of Symbian.
This article should help you make hacking Symbian Bellewhich will provide you with full access to all applications for Nokia, such as or programs, and even topics that in the past also demanded a signature.
The manual itself is designed not only for Symbian Belle, as it is superbly coping with Symbian 9.4, and even if you need, with older versions.
And most importantly, if you are unsure whether this hacking or not, then you should remember two things:
All perfect actions are performed on your fear and risk.
It is not necessary to worry much because of the first point, because this article has helped a variety of people, and it will help you.
Symbian Belle (Refresh)
1. Install on the smartphone Nortonsymbianhack.sisx.;2. Run it after installation;
3. Being in the program, click Options - Anti-Virus - Quarantine List;
4. After that, click Options - Restore. Restore quarantine files;
5. Exit the program and delete it from the Application Manager. One folder remained, you can delete it if desired: C: \\ Shared \\;
6. Next, install the program. ROMPATCHERPLUS_3.1.SISX.She is in an archive with hacking.
7. After installation, open the program and apply the patch:
Open4all - opens access to all closed folder in the file system;
8. Install the program ( if you write when installing "" Change the date for 2011);
9. Open the X-Plore program and copy the InstallServer.exe file ( if you have Symbian Belle Refresh, then you need to copy ynstallserver.exe (Refresh archive)), in C: / SYS / BIN /;
10. For Symbian Belle Refresh: move the runinstallservernotforrom.rmp to the / Patches folder ( is where ROMPUTICER is installed), After that, open the ROMPATCHER, select RuninstallServerNotForrom and place Add to Auto.
Download Archive for hacking: [b] (Dropping: 32495)
note
It is possible that when installing the application, you will write that this application is not compatible with your smartphone, it is not necessary to pay attention to it.Also, you may knock inscription Restore Failed: File Already Exists. To solve this problem, make Hard Reset, if it does not help, remove or format the memory card and try again.
