Characteristics
Printer Manufacturer: Samsung
SAMSUNG MLT-D111S cartridge refill
Black color
Resource: 1500 pages
The cartridge is used in printing devices:
Printers:
- Samsung Xpress M2020W.
- Samsung Xpress M2020.
- Samsung Xpress M2022.
- Samsung Xpress M2022W.
Multifunctional devices (printer / copier / scanner):
- Samsung Xpress M2022W.
- Samsung Xpress M2070
- Samsung Xpress M2070W.
- Samsung Xpress M2070fw.
Urgent departure is possible, for two hours the mechanic will have you and your printer again at work!
Where to fix MLT-D111S?
Resource 1500 pages is the maximum amount of prints that can be made when using the consumable material. The resource is indicated in the Pages of the A4 format with a certain percentage of their toner, as a rule, 5%.
Refueling MLT-D111S, warranty!
We give a quality guarantee - after our refueling, the cartridge will print no less copies than the original! The refueling can be made by our master at the address of the call either we can pick them up and deliver the courier to you the next day.
The main feature, when working with this cartridge, is the condition of the mandatory flashing of the printer itself. But this process is easily offset by the fact that almost all printer devices running with the Samsung MLT-D111S cartridge are absolutely reliable and technologically simple when operating.
Generation of printers using Samsung MLT-D111S cartridge appliances related to innovative devices. The consumer in the modern market, without any doubt, is interested in the quality of the quality with which the technique carries out a duplicate copying.
But not less, and sometimes even more interest among the client causes the issue of the economy of the technology used by him. Printers used by Samsung MLT-D111S cartridges are characterized by innovation working in the savings plane.
When implementing the economy regimes to reduce the quality of copy quality, it does not even go. Self Engineers and Technology developed technology that led to a revolution in the field of documentary copying. All printer devices that use Samsung MLT-D11S cartridges provide a specialist running with them, the ability to preliminary preprint of the document intended to copy.
Before you execute copying a document, the client has the ability not only to view the sample alleged to duplicate, but also affect the quality of the duplicating print itself. It is also possible to remove errors or lost the urgent relevance of the elements separately the function of choosing a print mode with maximum savings and much more is considered.
The services are currently relevant, on which the functioning of systems or whole working complexes depends. In particular, it concerns the refueling of cartridges (inkjet and laser, non-ferrous and monochrome), thanks to which the qualitative and full work of printers and business development is possible. Therefore, the provision of this service is the main activity of many companies. And this article will help you learn how the process of refilling cartridges to various models of printing devices to Samsung models.
Fuel procedure
Each SAMSUNG cartridge refill is a procedure for increasing the working resource of the consumable element. And so that the workflow takes place without damage to the quality of printed pictures, only high-quality toner (powder) must be purchased for refueling, as well as exactly adheres to the technological instruction. In addition, during the cartridge refueling, if such a procedure is performed in service centers, experts conduct inspection and diagnostics of working parts, from which the functioning of the cartridge and the printer depends on the state of which. Moreover, the company provided by specialists, the main activity of the activity is to refill cartridges to any models of devices, can shedding the operational period of equipment. Therefore, many users of printing devices independent refueling prefer services provided by professionals.
Refill the cartridge that is equipped with a chip requiring a replacement or flashing chip. In this case, this service allows you to use the maximum possible resource of the consumable element without the need to purchase the original cartridge.
Refracting
Replacing the chip installed by the Samsung manufacturer in order to control the print and the amount of toner spent, is the introduction of updated adjustments to the printer firmware or MFP, which ensures the operation of the device, provided the starting (original) cartridge. Usually, the starting cartridge is included in the kit of the acquired equipment, and after some time (after a certain number of prints issued) stops working. Usually the situation is as follows: after printed 2000-6000. (This quantity is installed by the manufacturer individually for each SAMSUNG model) The printer is blocked and the printout on it stops until the replacement of the spent expenditure element to the new, original with the chip.
To remove the lock and at the same time avoid the purchase of an expensive original cartridge, the user of the Samsung printing device can contact a specialized company that will not only make a cartridge refueling, but also establishes an update for the normal functioning of the equipment.
How monochrome cartridges are refilled
Often, high-performance printing devices and Samsung MFPs are used in offices, allowing every month to obtain large norms of high-quality printed products. Therefore, the use of laser monochrome (Samsung Xpress M2020, Xpress M2070 / 2070W, SCX 3400/4200, etc.) and color (Samsung CLX3305) are rather common. Therefore, the service of refueling cartridges compatible with certain Samsung models is also in demand.
Therefore, on the example of compatible Samsung printing devices at once (XPress M2020, Xpress M2070 / 2070W, SCX 3400/4200, ML-2160, 2165, 2165W, ML-2160, 2165, 2165W, PR.) Cartridges, we will tell how to refuel them.
For printing on SCX-3400/3405 printers, SAMSUNG MLT-D101S monochrome cartridge can be used. This black toner cartridge is also compatible with ML-2160, 2165, 2165W devices.
First of all, before the start of the procedure, it is necessary to equip the workplace appropriate. To do this, the working surface of the table should be seen a newspaper, and put on the hands of the gloves.
To fix the MLT-D101S cartridge, first of all, remove it from the device. To fill such a consumable element, the design will need to disassemble into 2 parts. To begin with, it is worth cutting plastic directions that fix the poultry sides. After removing the right plug, you should pull out the fixing photoman metal rod. At the same time, you should pay attention to the springs from the back, pressing the cartridge flaps to, separating the halves, not to lose them. After that, you can cap from the left side. Now you can disconnect the half of the MLT-D101S cartridge.
The next step is cleaning from the development of one half of the consumor and refueling the second. Opening the cork of the tank, we smear the toner in it. To refill the MLT-D101S cartridge for Laser devices ML-2160, 2165, 2165W, SCX-3400/3405, you can use toner powder for ML-1210/1710. This ink powder, like any other, is toxic. Therefore, it is necessary to work with it. When one tank is filled with toner, and the other is cleared of testing, the cartridge can be collected, given the reverse sequence. Upon completion of the assembly, to fix the plugs, you can use small screws, screwing them down instead of cut plastic directions.
After the MLT-D101S cartridge is filled and assembled, it should be reflashing, since the Samsung chip installed by the manufacturer will be even after the refueling procedure to block the operation of the device, and the printer will not print. In this way, you can refuel the MLT-D101S cartridges for Laser printers ML-2160, 2165 and MFP SCX-3400, 3405.
For printing on Samsung Xpress M2020 printers, Xpress M2020W uses the MLT-D111S cartridge with a resource-stated resource about 1 thousand pages. It is also compatible with other devices: Samsung Xpress M2070 / M2070W / M2070F / M2070FW. And to fix this cartridge and use the printer for the destination, you should also prepare a working surface as in the previous case.
Next, selecting the MLT-D111S cartridge from the device, plastic directions are cut on it, which allow you to remove the plugs. After removing them, the cartridge can be divided into two halves. After removing the next side covers, you can dismantle the photoered. After that, a white gear is removed that allows you to extract the primary charge shaft. After this shaft is extracted, you need to unscrew the screws holding the rocket, and then remove it.
After disassembling and cleaning all the elements from the toner residues, the SAMSUNG SCX-4200 cartridge can be collected, after which it is filled with a powder on the appropriate hole on the left side and, closing it, install the cartridge to the printer.
How color cartridges are refilled
The procedure for refueling the color cartridge can be viewed on the example of the Samsung CLX3305 device for which the CLT-K / M / Y / C406S consuming element is suitable. This procedure is very complex in that the operation of the device will block the chip installed by the manufacturer. Therefore, besides refueling the cartridge, the device will need to reflash.
To refill the cartridge for laser color MFPs, the CLX3305 is suitable from CLP-300. Preparation of high-quality powder of appropriate color cartridges (Black, Cyan, Magenta, Yellow), and equipping the work surface, you need to extract cartridges alternately. After breaking each to clean the components (shaft, blade, housing), you need to drill a small hole on the top cover of the CLX3305 to fall asleep in the powder there. All these manipulations require caution, since there is a risk of damaging the case, which will drive the CLX3305 cartridge. Therefore, many Samsung CLX3305 colored MFP users prefer to contact specialized centers for refueling, firmware and recovery cartridges.
Below is a video on refueling:
Samsung is known for the whole world not only by mobile devices, but also high-quality peripheral equipment. MFU SAMSUNG EXPRESS M2070. - One of the top goods on the market, which is a real workhorse both in the office and at home. The only significant disadvantage of this device is its cartridge, the cost of which is equal to the price of a new printer. However, the MLT-D111S cartridge can easily be overcome.
Attention! Do not risk the performance of printing devices, fuel the cartridge MLT-D111S for Xpress M2020 / M2070 printers total
Moreover, advanced users will be able to independently implement the refueling procedure by performing the necessary actions in step-by-step mode. To do this, consider a visual example in which we have prepared mLT-D111S cartridge - compatible with printers SAMSUNG SL-M2070 / M2071 / M2020 / M2021 / M2022.
List of necessary tools for refueling MLT-D111S
Each refill cartridge SAMSUNG MLT-D111S Begins with the preparation of the workplace. To do this, we will need some tool:
- Cleaning blade;
- New chip, as well as compatible toner analogue;
- Conductive lubricant and powder to lubricate the phototraban;
- Compact vacuum cleaner with nozzles;
- Miniature screwdrivers (flat and cross);
- Ostrogubs and the chisel;
- Electrock and drill 29 mm.
Step-by-step instructions for refilling Cartridge Samsung MLT-D111S
Before the procedure itself in the workplace, we settle the newspaper or oilbox, prepare the necessary tool and proceed:
Step No. 1.: We have a cartridge MLT-D111S by a handle from myself, after which the neat movements of the chisel or chisel cut three rivets that are on the chipped side.
Step number 2: We remove the end panel, which visually seems to be solid, but it is composite, so be careful and damage it.
Step number 3: On the other hand, you cut four rivets in the same way the cartridge panel, after which it slowly remove the end panel, which also consists of several elements.
Step number 4:we start removing the bunker with the old toner. To do this, take out the axis of the photobaban on the other side where there is a hub. Remove the photorad and make sure that his fragile holders remained in place.
Step number 5.: Now remove the blade for cleaning the bunker, after which we take out a large gear and clean the toner from the phototrabane in such a way that the seal of the blade itself is not blocked.
Step number 6: We install two screws and cleaning blade in the reverse order, after that we clean the charging shaft and set it again into the cartridge so that the guide elements of the steel in the desired position.
Step number 7: Insert the photo is first from the side where the hub is standing, and after promoting its axis through the gears and the toner cartridge panel. We mount the drive gear and put the prepared part of the consumor aside.
Step number 8: Remove from the second half of the MLT-D111S cartridge three gears and put them aside, after which we remove the gear of the developing shaft, pressing onto a small spool.
Step number 9: We unscrew the screw and remove the inner panel, and then remove the developing shaft itself, lifting it from the side where the sleeve is worth it.
Step number 10: We remove two screws and remove the rocket. This will make it possible to clean the remaining toner through the opening of the developing shaft.
Step number 11.: We produce cleaning felt seals and feed roller from the old consumator.
Step number 12: Now the Samsung MLT-D111S cartridge is refilled with a compatible toner analogue that needs to slowly fall asleep into the bunker.
Step number 13: We produce cleaning the dosing blade and subsequent installation, fixing with two cogs.
Step number 14: We install the developing shaft and the inner panel, and then proceed to the installation of four gears.
Step No. 15: We connect both half of the cartridge, while you need to make sure that all springs are installed in the right places.
Step number 16: We put the cartridge panels that block access to gears (the top panel is installed first).
Step No. 17: We take a drill and drill the holes in those places where the factory rivets were, then tighten the screws. We change the old chip, while making sure that it is correctly installed in the connector. We install the sidebar and also drill three holes in which we twist the screws.
Step No. 18: We put the cover of the photobaban itself. This means that the refueling of the Samsung MLT-D111S cartridge is over.
This toner replacement algorithm can be used as an experienced office equipment and beginner, but at the same time it is necessary to remember the responsibility that will fall on your shoulders. If you first decided to make yourself all the steps, then be kind to carefully execute each item, because due to excessive amateurness refilling the Samsung MLT-D111S cartridge can turn in expensive repair for your printer.
